Piaggio Fly 4T servicemanual - Scootergrisen
Piaggio Fly 4T servicemanual - Scootergrisen
Piaggio Fly 4T servicemanual - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MSS <strong>Fly</strong> 50 <strong>4T</strong> Engine<br />
- Fit a new oil seal on the outer rim with the help of<br />
the specific tools below.<br />
- Fit a new O-ring and lubricate it with grease.<br />
- Install the cover on the engine crankcase, insert<br />
the three screws and place the cover in its position.<br />
- Tighten the 3 screws to the prescribed torque.<br />
Specific tooling<br />
020376Y Adaptor handle<br />
020358Y 37x40-mm Adaptor<br />
Locking torques (N*m)<br />
Timing chain/oil pump compartment cover<br />
screws 4 ÷ 5 Nm<br />
Oil pump<br />
Removal<br />
- Remove the chain compartment cover undoing<br />
the 3 fixing screws indicated in the figure.<br />
- Take out the cover using the appropriate fusion<br />
couplings on the cover with a pair of pliers<br />
- Undo the 2 clamping screws in the figure and re-<br />
move the cover over the pump control crown gear.<br />
- Block the rotation of the oil pump control gear with<br />
a screwdriver inserted through one of its pump<br />
holes.<br />
ENG - 109
Change language