Piaggio Fly 4T servicemanual - Scootergrisen
Piaggio Fly 4T servicemanual - Scootergrisen
Piaggio Fly 4T servicemanual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Engine MSS <strong>Fly</strong> 50 <strong>4T</strong><br />
Removing the hub cover<br />
- Drain the rear hub oil<br />
- Remove driven pulley<br />
- Remove the rear brake shoes<br />
- Remove the 5 screws fixing the cover to the<br />
crankcase<br />
- Remove the cover with the wheel axle and pull it<br />
out<br />
- Remove the intermediate gear with the appropri-<br />
ate shim washers<br />
Removing the wheel axle bearings<br />
- Remove the oil seal and the seeger ring.<br />
- Fix the hub cover properly to avoid damaging the<br />
sealing surface with the housing<br />
- Remove the wheel axle bearing using the specific<br />
tool<br />
Specific tooling<br />
020363Y 20 mm guide<br />
020376Y Adaptor handle<br />
020477Y Adaptor 37 mm<br />
ENG - 74
Change language