Piaggio Fly 4T servicemanual - Scootergrisen
Piaggio Fly 4T servicemanual - Scootergrisen
Piaggio Fly 4T servicemanual - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MSS <strong>Fly</strong> 50 <strong>4T</strong> Maintenance<br />
- Refill the engine with oil through the oil filling hole<br />
located in the oil sump.<br />
- Engine oil capacity: ~ 850 cc.<br />
- Lock the cap manually.<br />
N.B.<br />
Run the engine for a couple of minutes and check the oil level<br />
when the engine is cold. The level should always be below the<br />
MAX mark<br />
N.B.<br />
For the first top-up or when servicing, add 850 cm³ of engine<br />
oil; for any other case, add 650 cm³ and top-up, if required.<br />
Recommended products<br />
AGIP CITY HI TEC <strong>4T</strong> Engine oil<br />
SAE 5W-40 Synthetic oil that exceed the require-<br />
ments of API SL, ACEA A3, JASO MA specifica-<br />
tions<br />
Locking torques (N*m)<br />
Engine oil pre-filter cover 25 ÷ 28 Nm<br />
Checking the ignition timing<br />
- Turn the flywheel clockwise until its 2nd notch<br />
coincides with the Pick-up reference mark as<br />
shown in the figure.<br />
Make sure that the reference point on the camshaft<br />
command crown is aligned with the reference point<br />
on the head as shown in the second figure.<br />
If the reference is opposite the indicator on the<br />
head, turn the crankshaft once more as the piston<br />
must be at the TDC of the bursting phase.<br />
N.B.<br />
TIME THE TIMING SYSTEM UNIT AS DESCRIBED IN CHAP-<br />
TER 6 IF IT IS NOT IN PHASE<br />
MAIN - 35
Change language