Single Reduction & Single Reduction with Differential Lock - Spicer
Single Reduction & Single Reduction with Differential Lock - Spicer
Single Reduction & Single Reduction with Differential Lock - Spicer
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
23<br />
11. Prior to installation of yoke, make sure yoke is clean<br />
and dry.<br />
12. Install yoke.<br />
13. Install yoke nut using one of the following options:<br />
Install a new nut <strong>with</strong> the pre-applied thread<br />
adhesive compound. Tighten the nut to the<br />
specified torque as specified in the back of this<br />
publication.<br />
If a new nut <strong>with</strong> pre-applied thread adhesive<br />
compound is unavailable, apply “Loctite 277” or<br />
“271” to the nut along two threads, for at least<br />
two flats (120°) of the nut midway through the<br />
thickness.<br />
IMPORTANT<br />
Follow the instructions specified by the thread adhesive<br />
manufacturer when applying thread adhesive compound.<br />
2 Flats<br />
(120 deg.) Midway thru<br />
thickness of nut<br />
Note: Use of a torque multiplier is recommended.<br />
TIP: If you can't get the correct torque on yoke nut,<br />
try torquing the nut <strong>with</strong> the truck wheels on the<br />
ground and <strong>with</strong> the axle shafts installed.<br />
Pinion Assembly
Change language