Single Reduction & Single Reduction with Differential Lock - Spicer
Single Reduction & Single Reduction with Differential Lock - Spicer
Single Reduction & Single Reduction with Differential Lock - Spicer
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
37<br />
Wheel <strong>Differential</strong> lock<br />
Install and Adjust <strong>Differential</strong> <strong>Lock</strong> - Type 1 Axles<br />
Special Instructions<br />
Note: With differential carrier completely assembled and<br />
adjusted, install differential lock assembly for Type 1<br />
axles as follows:<br />
Procedure -<br />
1. Install fixed curvic clutch on splined hub of flanged<br />
differential case.<br />
Type 1<br />
2. Install Snap ring<br />
3. If shift fork and sliding curvic clutch are disassembled,<br />
engage fork <strong>with</strong> clutch hub and install spring<br />
pin in end of fork long leg to hold components<br />
together. See illustration for fork mounting position<br />
on clutch. Install clamp screw in fork and tighten finger-tight.<br />
Long leg<br />
of shift<br />
fork<br />
4. Place compression spring and switch actuator in<br />
shift box.<br />
Switch<br />
actuator<br />
Compression<br />
spring
Change language