John Deere AutoTrac™ Controller - StellarSupport - John Deere
John Deere AutoTrac™ Controller - StellarSupport - John Deere
John Deere AutoTrac™ Controller - StellarSupport - John Deere
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AutoTrac <strong>Controller</strong> Diagnostic Trouble<br />
Codes<br />
Trouble Codes<br />
Select TROUBLE CODES button and a list of controllers<br />
will appear and controllers with diagnostic codes are<br />
indicated.<br />
Individual controllers can be accessed by pressing<br />
ENTER button to view codes for that controller.<br />
Codes can also be displayed for all controllers by<br />
selecting SHOW ALL button and pressing ENTER button.<br />
Codes can be relayed to a <strong>John</strong> <strong>Deere</strong> dealer to assist in<br />
diagnosing machine problems.<br />
<strong>John</strong> <strong>Deere</strong> AutoTrac <strong>Controller</strong> Troubleshooting<br />
PC8663 —UN—05AUG05<br />
PC8655 —UN—05AUG05<br />
MENU button<br />
MESSAGE CENTER button (With Info Icon)<br />
PC8669 —UN—05AUG05<br />
TROUBLE CODES softkey<br />
SPN FMI Description<br />
000168 03<br />
Indicates SSU unswitched supply voltage (cc# 182) out of<br />
range high<br />
000168 04<br />
Indicates SSU unswitched supply voltage (cc# 182) out of<br />
range low<br />
000232 09 Indicates differential correction signal to GPS is not available<br />
000517 09 Indicates GPS Speed Message Missing<br />
Indicates control unit SSU being reprogrammed (boot block<br />
000628 12<br />
generated). Reprogram control unit SSU. Replace control<br />
unit SSU if condition persists.<br />
Indicates incomplete calibration of steering valve.<br />
000630 13<br />
Wheel Angle Sensor calibration incomplete.<br />
AutoTrac will remain disabled until successful calibration of<br />
system.<br />
Indicates sensor supply voltage (cc# 733) for steering wheel<br />
003509 03<br />
pressure sensor and/or wheel angle position sensor out of<br />
range high.<br />
Indicates sensor supply voltage (cc# 733) for steering wheel<br />
003509 04<br />
pressure sensor and/or wheel angle position sensor out of<br />
range high.<br />
Indicates sensor supply current too high on (cc# 733) for<br />
003509 05<br />
steering wheel pressure sensor and/or wheel angle position<br />
sensor.<br />
Indicates sensor supply current too low on (cc# 733) for<br />
003509 06<br />
steering wheel pressure sensor and/or wheel angle position<br />
sensor.<br />
Indicates steering wheel pressure sensor (cc# 777), load<br />
004086 03<br />
sense pressure output faulty.<br />
Voltage too high.<br />
AutoTrac will not deactivate<br />
Iindicates steering wheel pressure sensor (cc# 777), load<br />
004086 04<br />
sense pressure output faulty.<br />
Voltage too low.<br />
AutoTrac will not deactivate<br />
520429 05<br />
Indicates steering valve left coil (cc# 752) current too low or<br />
open circuit.<br />
520429 06<br />
Indicates steering valve left coil (cc# 752) current too high<br />
or shorted to ground.<br />
20-3<br />
Continued on next page JS56696,000053E -19-16JUL09-1/2<br />
031312<br />
PN=24