John Deere AutoTrac™ Controller - StellarSupport - John Deere

Deactivating System
CAUTION: Always turn off (Deactivate and Disable)
AutoTrac system before entering a roadway.
To turn off AutoTrac from GUIDANCE VIEW
tab, toggle STEER ON/OFF button until
STEER OFF is displayed.
AutoTrac system can be made DEACTIVE by following
methods:
• Turning steering wheel.
StarFire
AutoTrac controller takes its StarFire Height and Fore-Aft
measurements from the StarFire setup. To change
this information select the menu button then select the
StarFire button. The StarFire main page will appear.
Select the Setup tab (A) at the top of the screen.
StarFire Height (in.) Enter the height of the StarFire
receiver into the Height box (C) of the StarFire Setup
screen. Height is measured from the ground to the center
(where the green and yellow meet) of the dome.
StarFire Fore-Aft (in.) Enter the Fore-Aft measurement
into the Fore/Aft box (B) of the StarFire Setup screen.
This is the distance from the fixed axle of the machine to
the receiver. The fixed axle is the rear axle on a row crop
tractor. The fixed axle is the front axle on an articulated
tractor
NOTE: For more information on StarFire setup
see the StarFire operators manual that
matches your equipment.
A—Setup tab
B—Fore/Aft
C—Height
GS2 Display 2600
30-2
• Slowing to speeds less than 0.5 km/h (0.3 mph).
• Exceeding forward speed of
Tractor - 30 km/h (18.6 mph)
Sprayer - 37 km/h (23 mph)
Combine - 20 km/h (12.4 mph)
• Exceeding reverse speed of 10 km/h (6.0 mph).
• Toggle STEER ON/OFF button until STEER OFF is
displayed in GUIDANCE VIEW tab.
• Operator out of seat for more than 5 seconds if using
seat switch or no activity detected by operator presence
monitor for 7 minutes.
PC8663 —UN—05AUG05
PC13738 —UN—17MAY11
Menu Button
SF3000 Button
StarFire Setup Screen
OUO6050,0000D68 -19-22SEP07-1/1
PC13726 —UN—19MAY11
BA31779,00003BD -19-21FEB12-1/1
031312
PN=44