Report - DCE - Nationalt Center for Miljø og Energi

4UBUJPOBSZ DPNCVTUJPO /'3 TFDUPS " " BOE "
This chapter includes stationary combustion plants in the NFR sectors 1A1,
1A2 and 1A4.
4PVSDF DBUFHPSZ EFTDSJQUJPO
Emission source categories and fuel consumption data are presented in this
chapter.
&NJTTJPO TPVSDF DBUFHPSJFT
In the Danish emission database, all activity rates and emissions are defined
in SNAP sector categories (Selected Nomenclature for Air Pollution) according
to the CORINAIR system 1 . The emission inventories are prepared from a
complete emission database based on the SNAP sectors. Aggregation to the
NFR sector codes is based on a correspondence list between SNAP and NFR
enclosed in Annex 2A-1. Stationary combustion is defined as combustion activities
in the SNAP sectors 01-03, not including SNAP 0303.
Stationary combustion plants are included in the emission source subcategories:
• 1A1 Energy, Fuel consumption, Energy Industries
• 1A2 Energy, Fuel consumption, Manufacturing Industries and Construction
• 1A4 Energy, Fuel consumption, Other Sectors
The emission and fuel consumption data included in tables and figures in
Chapter 3.2 only include emissions originating from stationary combustion
plants of a given NFR sector. The NFR sector codes have been applied unchanged,
but some sector names have been changed to reflect the stationary
combustion element of the source.
'VFM DPOTVNQUJPO EBUB
In 2010, the total fuel consumption for stationary combustion plants was 552
PJ of which 423 PJ was fossil fuels and 129 PJ was biomass.
Fuel consumption distributed according to the stationary combustion subcategories
is shown in Figure 3.1 and Figure 3.2. The majority - 60 % - of all
fuels is combusted in the source category, (OHFWULFLW\ DQG KHDW SURGXFWLRQ Other
source categories with high fuel consumption are 5HVLGHQWLDO SODQWV and ,Q
GXVWU\.
1 And some additional SNAP added for industrial combustion.