HS-105P, PE. SA AutoCam™ Pan & Tilt Head - Vinten Radamec
HS-105P, PE. SA AutoCam™ Pan & Tilt Head - Vinten Radamec
HS-105P, PE. SA AutoCam™ Pan & Tilt Head - Vinten Radamec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>HS</strong>-<strong>105P</strong> Installation<br />
Other Jumpers<br />
The board in the <strong>HS</strong>-<strong>105P</strong> head has a number of other configuration jumpers.<br />
These jumpers are set by <strong>Vinten</strong> at the factory, or during installation, to match<br />
the requirements of your application. The jumpers (see page 18 for jumper locations)<br />
and their functions are as follows.<br />
Miscellaneous Functions - J3<br />
The functions of J3 are listed opposite. Positions 1 and 4 are not used. Positions<br />
2 and 3 set the range for pan and tilt in conjunction with the clip limit jumpers to<br />
achieve the desired range. Various damping values (stored in PROM) can be<br />
selected with jumpers in positions 5 and 6. Positions 7 and 8 are used to reverse<br />
the direction of pan and tilt if desired.<br />
J6<br />
Selects the baud rate. Normally set for 9600 baud.<br />
J9<br />
Selects the data communication protocol. Normally set for RS422.<br />
3-24 User Manual
Change language