HS-105P, PE. SA AutoCam™ Pan & Tilt Head - Vinten Radamec

M
Manual Outline 1–5
Mechanical Installation 3–4
Motor Drive Fuses 4–12
Mounting The Pan & Tilt Head 3–4
Mounting The Payload 3–4
MultiController II System 1–10
O
Operating Footprint 1–3
Operation 2–1
P
Pan Limit Switches 3–14
Pan Limits 3–14
Pan/Tilt Direction Jumper 3–24
Pinch Points 1–4
Power Supply Theroy 4–6
Power Switch 1–4
S
Safe Operating Zone 1–3
Safe Working Environment 1–2
Safety 1–2
Service Philosophy 4–2
Servo, Zoom/Focus 4–9
Servos, Analog 4–9
Servos, Digital 4–9
Setup, Lens Drive 3–6
Sharp Edges 1–4
Signs, Warning 1–3
Specifications 1–7
Static Electricity 4–2
Support, Technical iv
T
Talking To The HS-105SA 3–26
Technical Support iv
Tilt Fuse Failure 4–12
HS-105P Index
II
Tilt Fuse Replacement 4–12
Tilt Limit Switches 3–16
Tilt Limits 3–14
Tools You Will Need 3–2
Typical Applications 1–10
W
Warning
Customer Responsibility 1–2
Operating Footprint 1–3
Pinch Points 1–4
Power Switch 1–4
Safe Operating Zone 1–3
Safe Working Environment 1–2
Sharp Edges 1–4
Static Electricity 4–2
Unexpected Motion 1–3
Warning Labels ii
Warning Signs 1–3
Warnings 1–2
Warranty v
Waveform Diagrams 4–14
Wiring Diagram 4–8
Z
Zoom Calibration 3–12
Zoom Servo 4–9