MAX T100 HD - FTE Maximal
MAX T100 HD - FTE Maximal
MAX T100 HD - FTE Maximal
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ev 1.1<br />
IMAGE 1<br />
IMAGE 2<br />
QUICK INSTALLATION GUIDE<br />
STEP 2:<br />
OUTPUT VIDEO CONFIGURATION<br />
The <strong>HD</strong>MI output of receiver will start in 720p mode by<br />
default, This mode should be supported by your TV <strong>HD</strong>MI<br />
input. Please verify in your TV manual that the <strong>HD</strong>MI input<br />
supports this video mode. This receiver also supports<br />
the following video modes (By origin / Native TV / 480i /<br />
480p / 576i / 576p / 720p_50 / 720p_60 / 1080i_25 /<br />
1080i_30 / 1080p_50 / 1080p_60). If your TV does not<br />
support this video mode, and you want to connect by <strong>HD</strong>MI,<br />
we recommend you fi rst connect by scart connexion and in<br />
the installation wizard or in the menu of the receiver change<br />
the video mode to one suitable for connecting to your TV by<br />
<strong>HD</strong>MI.<br />
STEP 3: BASIC CONFIGURATION OF THE<br />
RECEIVER<br />
The receiver includes an installation assistant that will help<br />
you to setup the different parameters.<br />
When the receiver is turned on at fi rst time (using the button<br />
at the rear panel of the receiver), the next menu is shown on<br />
the TV:<br />
In order to move through the different options of this menu,<br />
please use the keysof the remote control. - Region: select<br />
your country using keys.<br />
- OSD Language: select the language of the menu and other<br />
information of the receiver. To choose between the different<br />
languages, use keys of the remote control.<br />
- Output Video Mode: is used to switch the display mode. You<br />
can press [ ] key to select mode output video.<br />
- Aspect Mode is used for switching the screen aspect ratio<br />
mode. Now we provide below options: 4:3 PS / 4:3 LB /<br />
16:9 / AUTO. You can press [ ] key to select each mode<br />
circularly.<br />
- Auto Scan: before making an auto scan (press [OK] button)<br />
be sure that the data of the Region option (Image 1) is<br />
correct, in other case the search of channels will be made<br />
wrongly. Once the Region option is confi rmed, please press<br />
[OK]. ( image 2)<br />
Don’t make any action with the receiver until the Auto scan<br />
has fi nished. For more information about this option, please<br />
read point 4.1 of the complete manual.<br />
PAG. 5<br />
ENGLISH