Eaton E Series DX Product Manual - Fusion Power System

More documents

Recommendations

Info

4 Mechanical installation The UPS and accessories are delivered on a specifically designed pallet that is easy to move with a forklift or a pallet jack. Keep the UPS always in upright position and do not drop the equipment. Do not stack the pallets. 4.1 Delivery check The UPS is delivered with the following items: 1. Winpower disc 2.RS-232 serial cable 3.Delivery documents 4.User Guide 5.Key 4.2 Unpacking and visual inspection Check that there are no signs of shipping damages. The equipment should be transported in the upright position. Unpack the equipment by removing the packing and shipping materials. Make a visual inspection. Remove the equipment from the pallet and make sure that the floor surface is solid and suitable for the wheeling and heavy weight. Remove cover plate → Remove side plate → Remove stuffing and fix 12 Note! A claim for shipping damage must be filed immediately and the carrier must be informed within 7 days of receipt of the equipment. The packing materials should be stored for further investigation.
Check the information on the type designation label of the equipment to verify that the unit is of the correct type. The type designation label includes ratings, a CE marking, a type code, a part number and a serial number. The serial number is important when making inquiries. It allows individual recognition of the equipment. 13
Page 2 and 3: ©2008 Eaton Corporation All Rights
Page 4 and 5: 5. 6. 7. 8. 9. Electrical installat
Page 6 and 7: 1.3 CE marking The product has the
Page 8 and 9: 2 Introduction The product describe
Page 10 and 11: ① AC: This light and inverter lig
Page 12 and 13: 8 Front view(door open) CHGR FAN Ma
Page 14 and 15: 3.4 Characteristics 3.5 AC input 10
Page 18 and 19: 4.3 Planning before installation Th
Page 20 and 21: The switching sequence for circuit
Page 22 and 23: 1)Switch-off picture 2)If it is in
Page 24 and 25: Then the UPS turn to bypass mode. 4
Page 26 and 27: 5 Electrical installation 5.1 Elect
Page 28 and 29: 2.If UPS rectifier input and bypass
Page 30 and 31: Routing of communication cables or
Page 32 and 33: 28 Notice! The most common battery
Page 34 and 35: Recharging batteries Exchanging bat
Page 36 and 37: RS232 port RS485 port 32
Page 38 and 39: 7 User operations 7.1 Single machin
Page 40 and 41: 5)Press ▼ again to obtain the bel
Page 42 and 43: 3)Select “Yes, Confirm” to swit
Page 44 and 45: 5)Select “Yes, Confirm” to swit
Page 46 and 47: 9. Procedures of DC switch-on: 42 A
Page 48 and 49: Single machine wire connection draw
Page 50 and 51: 8.1 Regular service/intervals The U
Page 52 and 53: 48 Note! Parrallel wires should be
Page 54 and 55: 11 Warranty The product is warrante
Page 56: Should any display or warning messa

Eaton E Series DX Product Manual - Fusion Power System

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?