Blind actuator 1-gang flush-mounted Order-No. 2165 00 - Gira

More documents

Recommendations

Info

Software "Venetian blind, input 20BD11" Object table Function: Short time operation Object h 37 Function Short time operation Name Output 1 Type 1-bit DPT 1.007 Flag C, S, - 1 Description 1-bit object for activation of short time operation or for stopping a drive movement. Function: Forced position Object h 38 Function Forced position Name Output 1 Type 2-bit DPT 2.008 Flag C, S, - 1 Description 2-bit object for forced control. The object state after bus voltage return can be predefined by means of a parameter. Function: Light scene function Object h 39 Function Scene extension Name Output 1 Type 1 byte DPT 18.001 Flag C, S, - 1 Description 1-byte object for recalling scenes or for storing new scene values. Function: Sun protection function Object h 41 Function Automatic mode Name Output 1 Type 1-bit DPT 1.003 Flag C, S, - 1 Description 1-bit object for activation or deactivation of the automatic sun protection in the extended sun protection mode ("1" = automatic mode activated / "0" = automatic mode deactivated). The object is only visible, if the automatic sun protection is to be tracked immediately when the state of the automatic object changes (parameter setting). Function: Sun protection function Object h 42 Function Automatic mode disable Name Output 1 Type 1-bit DPT 1.003 Flag C, S, - 1 Description 1-bit object for disabling of the automatic sun protection in the extended sun protection mode. The polarity can be configured. The object is only visible, if the automatic sun protection is to be tracked immediately when the state of the automatic object changes (parameter setting). 1: For reading, the R-flag must be set. The last value written to the object via the bus will be read. Order-No. 2165 00 Page 22 of 149
Software "Venetian blind, input 20BD11" Object table Function: Sun protection function Object h 42 Function Automatic mode Name Output 1 Type 1-bit DPT 1.003 Flag C, S, - 1 Description 1-bit object for activation or deactivation of the automatic sun protection in the extended sun protection mode. The polarity can be configured. The object is only visible, if the automatic sun protection is to be tracked only when the state of the automatic object changes next time (parameter setting). Function: Sun protection function Object h 43 Function Direct operation disable Name Output 1 Type 1-bit DPT 1.003 Flag C, S, - 1 Description 1-bit object for disabling direct operation in the extended sun protection mode (direct operation = Move / Step / Position / Scene). The polarity can be configured. Function: Sun protection function Object h 44 Function Sunshine / shading facade Name Output 1 Type 1-bit DPT 1.002 Flag C, S, - 1 Description 1-bit object for activation or deactivation of sun shading in the simple or extended sun protection mode (sun / no sun). The polarity can be configured. Function: Sun protection function Object h 45 Function Sunsh./shading position 2 Name Output 1 Type 1 byte DPT 5.001 Flag C, S, - 1 Description 1-byte object for presetting a variable position value (0…255) for the height of the Venetian blind or roller shutter height or the venting louver position when the sun protection is active. Function: Sun protection function Object h 46 Function Slat pos. Sunshine / shading Name Output 1 Type 1 byte DPT 5.001 Flag C, S, - 1 Description 1-byte object for presetting a variable slat position value (0…255) when the sun protection is active. 1: For reading, the R-flag must be set. The last value written to the object via the bus will be read. 2: The object designation varies with the type of blind (Venetian blind, roller shutter / awning, venting louver). Order-No. 2165 00 Page 23 of 149
Page 1 and 2: KNX/EIB Product documentation Issue
Page 3 and 4: Product definition 1 Product defini
Page 5 and 6: Installation, electrical connection
Page 13 and 14: Technical data 3 Technical data Gen
Page 15 and 16: 4.2 Software "Venetian blind, input
Page 17 and 18: Software "Venetian blind, input 20B
Page 21: Software "Venetian blind, input 20B
Page 29 and 30: 4.2.4.3 Channel-orientated function
Page 37 and 38: 4.2.4.4 Channel-oriented functions
Page 73 and 74:
Software "Venetian blind, input 20B
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
- II. Sun protection with shading c
Page 81 and 82:
Page 83 and 84:
4.2.4.4.6 Settings for automatic he
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
4.2.4.5 Priorities for the output S
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Priority of sun protection with res
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Delay scene recall ? Yes No Softwar
Page 147 and 148:
Forced position on, lowering / clos
Page 149:
Appendix Gira Giersiepen GmbH & Co.
show all

Blind actuator 1-gang flush-mounted Order-No. 2165 00 - Gira

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?