Blind actuator 1-gang flush-mounted Order-No. 2165 00 - Gira
Blind actuator 1-gang flush-mounted Order-No. 2165 00 - Gira
Blind actuator 1-gang flush-mounted Order-No. 2165 00 - Gira
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Software "Venetian blind, input 20BD11"<br />
Object table<br />
Function:<br />
Sun protection function<br />
Object<br />
h 47<br />
Function<br />
Sunshine slat position offset<br />
Name<br />
Output 1<br />
Type<br />
1 byte<br />
DPT<br />
6.<strong>00</strong>1<br />
Flag<br />
C, S, - 1<br />
Description<br />
1-byte object for presetting a slat position angle (- 1<strong>00</strong> % … +1<strong>00</strong> % / smaller<br />
or larger position angles are treated as + or – 1<strong>00</strong> %) for 'manual'<br />
readjustment of the slat position during active sun protection.<br />
Function:<br />
Sun protection function – automatic heating/cooling<br />
Object<br />
h 48<br />
Function<br />
Heating/cooling presence<br />
Name<br />
Output 1<br />
Type<br />
1-bit<br />
DPT<br />
1.018<br />
Flag<br />
C, S, - 1<br />
Description<br />
1 -bit object for activation of the presence mode during<br />
automatic heating/cooling. The polarity can be configured. This object is<br />
generally linked with presence detectors.<br />
Function:<br />
Sun protection function – automatic heating/cooling<br />
Object<br />
h 49<br />
Function<br />
Heating/cooling switchover<br />
Name<br />
Output 1<br />
Type<br />
1-bit<br />
DPT<br />
1.1<strong>00</strong><br />
Flag<br />
C, S, - 1<br />
Description<br />
1-bit object for switching over between heating and cooling operation during<br />
automatic heating/cooling. The polarity can be configured. This object is<br />
generally linked with room temperature controllers<br />
(object "heating/cooling switchover").<br />
Function:<br />
Position feedback<br />
Object<br />
h 50<br />
Function<br />
Position feedback 2<br />
Name<br />
Output 1<br />
Type<br />
1 byte<br />
DPT<br />
5.<strong>00</strong>1<br />
Flag<br />
C, -, T, R 3<br />
Description<br />
1-byte object for position feedback of the Venetian blind or roller shutter height<br />
or louver position (0…255).<br />
Function:<br />
Position feedback<br />
Object<br />
h 51<br />
Function<br />
Slat position feedback<br />
Name<br />
Output 1<br />
Type<br />
1 byte<br />
DPT<br />
5.<strong>00</strong>1<br />
Flag<br />
C, -, T, R 3<br />
Description<br />
1-byte object for position feedback of the slat position (0…255) if one shutter<br />
is controlled.<br />
1: For reading, the R-flag must be set. The last value written to the object via the bus will be<br />
read.<br />
2: The object designation varies with the type of blind (Venetian blind, roller shutter / awning,<br />
venting louver).<br />
3: The communication flags are set automatically depending on the configuration. "T" flag for<br />
active signalling object; "R" flat for passive status object.<br />
<strong>Order</strong>-<strong>No</strong>. <strong>2165</strong> <strong>00</strong><br />
Page 24 of 149
Change language