17.01.2014 Views

Module 9: Control Techniques - International Association of Fire ...

Module 9: Control Techniques - International Association of Fire ...

Module 9: Control Techniques - International Association of Fire ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

IAFF Training for Hazardous Materials: Technician©<br />

Student Text<br />

• Patching is the placement <strong>of</strong> a material over an opening<br />

in a container. Again, these devices can be purchased<br />

commercially or made by responders. Patching items<br />

used include neoprene or rubber gasket material with<br />

webbing, epoxy/glue patches, and sections <strong>of</strong> containers<br />

cut to fit various curves. There are many pre-made kits<br />

available for use in plug and patch operations. Some<br />

manufacturers produce kits that contain various sizes <strong>of</strong><br />

rubber stoppers, cone wedges, molly bolts for use with<br />

stoppers, different sizes and materials <strong>of</strong> gaskets, epoxy<br />

patches and web-type clamps. These can be used on<br />

smaller leaks on any size container.<br />

• Bandages can be used with, or instead <strong>of</strong> patches.<br />

Bandages, which are usually made <strong>of</strong> flexible metal,<br />

encircle the container to hold a patch in place. They<br />

can be pneumatically operated, tied, twisted, or tightened<br />

by toggle bolts.<br />

• Auxiliary closure devices are meant to be used when<br />

an engineered opening such as a valve, cover, or<br />

manway has been breached. Dome cover clamps are<br />

typically used on the manways <strong>of</strong> road liquid cargo<br />

tanks. They fit over the dome cover <strong>of</strong> a manway and<br />

tighten down to press the cover back into position. If<br />

the leak is caused by a faulty or missing gasket, dome<br />

cover clamps may not stop the release completely.<br />

Dome clamps can be purchased in varying sizes. It is<br />

advisable to carry more than one size and to carry<br />

enough to control breaches in all size covers you may<br />

encounter in your jurisdiction. Kits are available for<br />

cylinders that allow you to place a hood over a leaking<br />

valve. This hood contains another valve which can then<br />

be closed.<br />

9-20 <strong>Module</strong> 9: <strong>Control</strong> <strong>Techniques</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!