Module 9: Control Techniques - International Association of Fire ...

More documents

Recommendations

Info

IAFF Training for Hazardous Materials: Technician© Student Text Objectives Upon completion of this module, participants will be able to: Objectives • Describe the differences between “confinement” and “containment” operations. • Describe the considerations of performing “offensive” operations. • Describe methods used to reduce hazards before offensive actions are taken. • Describe basic procedures for reducing hazards while engaged in offensive operations. • Describe three basic techniques for reducing hazards of product spills/ releases. • Given a pressure vessel, select the appropriate equipment and demonstrate a method of containing leaks from the following sources: fusible metal plug, fusible plug threads, sidewall of container, valve blowout, valve gland, valve inlet threads, valve seat, valve stem assembly failure. • Given a pressure vessel, demonstrate the ability to: close valves that are open, replace missing plugs, tighten loose plugs. • Demonstrate the ability to contain the following types of leaks in a 55- gallon drum: bung leak, chime leak, forklift puncture, nail puncture. • Given a 55-gallon drum, demonstrate the following overpack techniques: rolling slide-in (vee roll), slide-in, slip-over. • Given an MC 306/DOT 406, demonstrate the proper use of a dome clamp to seal a dome cover leak. • Identify methods, equipment and considerations in controlling a fire in an MC 306/DOT 406 aluminum shell tanker. • Describe at least one method for containing the following types of leaks in MC 306/DOT 406, MC 307/DOT 407, MC 312/DOT 412, tankers: dome cover leak, irregular shaped hole, puncture, split or tear. • Describe three product removal and transfer considerations for the following overturned tankers: MC 306/DOT 406, MC 307/DOT 407, MC 312/DOT 412, MC 331, MC 338. • Describe three safety considerations in product transfer operations. • Identify the maintenance and inspection procedures for the tools and equipment used for mitigation by the jurisdiction, according to the manufacturer. NFPA Standards NFPA 472 1-2 NFPA 472 4-3.1 NFPA 472 4-3.2 NFPA 472 4-5.1 NFPA 472 4-3.5.1 NFPA 4-4.3.1 NFPA 472 4-4.3.2 NFPA 472 4-4.3.3 NFPA 472 4-4.3.4 NFPA 472 4-4.3.8 NFPA 472 4-4.3.9 NFPA 472 4-4.3.10 NFPA 472 4-4.3.10 NFPA 472 4-4.3.7 NFPA 472 4-4.3.5 OSHA Standards 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 29 CFR 1910.120 (q) (6) (iii) (F) 9-4 Module 9: Control Techniques
Student Text IAFF Training for Hazardous Materials: Technician© Instructor Preparation Module 9: Control Techniques 9-5
Page 1 and 2: Student Text IAFF Training for Haza
Page 3: Student Text IAFF Training for Haza
Page 55 and 56:
Student Text IAFF Training for Haza
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
show all

Module 9: Control Techniques - International Association of Fire ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?