800 Series Power Analyzer PowerVision™ Instruction Manual

In the quality study shown above, the file was run against a standard created to match the results
against the minimum voltage requirements to run the milling machines in the main plant without failure.
Based on the report, the data filed to meet the requirements of the milling machine.
The study can be broken down into smaller groups to get a better idea on why the test was failed. By
breaking the grouping into days instead of weeks, the user can determine what day during the week
that the failure occurred.
To change the grouping of the quality study:
1) Left-click on the configure icon, or right-click on the graph and select Configure from the graphing
menu.
2) The software will bring up the configuration viewer.
3) The general tab of the configuration viewer lists the title and description of the applied study, the
grouping and the large steps for navigating through the groupings.
4) Left-click on the down arrow next to the Group by field. This will bring up a listing of the available
grouping options.
5) Left-click on the desired grouping and press the OK button. The software will automatically run the
study with the new grouping.
6) Press the Cancel button to exit the viewer without making a change.
46