EAGLE Version 5 Update Information - Cadsoft

within the schematic editor, or creating a new sheet in an existing
schematic.
- Fixed handling error conditions in case the PRINT command tries to write
to a file that is currently open by another application.
- Fixed updating the surrounding rectangle of the source sheet when moving a
part from one sheet to another.
- Fixed displaying layer colors and fill styles in dialogs on Ubuntu-Linux
(problem observed on Ubuntu version 9.10).
- Fixed drawing the large cursor on Ubuntu-Linux with desktop transparency
effect (problem observed on Ubuntu version 9.10).
Release notes for EAGLE 5.6.0
=============================
* Bugfixes:
- Fixed RIPUP to make it stop at pads when clicking on an airwire
(was broken since version 5.2.4).
- Fixed a possible "Abort: Unknown objectType..." in the SIGNAL command.
- Fixed a bug in the Autorouter that sometimes caused DRC errors at pads,
vias and SMDs.
- Fixed the status message after a DRC or ERC, which sometimes wrongfully
contained the word "approved".
- Fixed a possible inconsistency of net classes after renaming all segments
of a net on the current sheet.
- Fixed a possible inconsistency of net classes after pasting parts with
power pins that automatically create new signals in the board.
- Fixed handling cfPad/SmdImpact in the Autorouter.
- Fixed terminating a track in the Follow-me router by clicking twice at the
same point.
- Fixed an unexpected offset of the airwire when clicking at an unroutable
point in the Follow-me router.
Release notes for EAGLE 5.5.0
=============================
* User Language:
- The new function strxstr() can be used to search strings using regular
expressions in User Language Programs.
- Added a note to the online help for UL_DEVICE about using the 'package'
data member to check whether this device has a package.
* Design Rule Check:
- The DRC no longer issues a "Drill Distance" error for vias that have only
one layer in common, e.g. 1-2 and 2-3 ("stacked vias").
- The Design Rules dialog now issues a warning if the layer setup uses
any layers that are not available in the licensed program edition.