VDX104 Manual - Tri-M Systems Inc.

18-Nov-2010
VDX104 Manual
12.6 Console Redirection Configuration
Advanced
********************************************************************************
* Configure Remote Access type and parameters * Options *
* *************************************************** * *
* Remote Access [Enabled] * Disabled *
* * Enabled *
* Serial port number [COM1] * *
* Base Address, IRQ [3F8h, 4] * *
* Serial Port Mode [115200 8,n,1] * *
* Flow Control [None] * *
* Redirection After BIOS POST [Always] * *
* Terminal Type [ANSI] * *
* VT-UTF8 Combo Key Support [Enabled] * *
* Sredir Memory Display Delay [No Delay] * *
* * * Select Screen *
* * ** Select Item *
* * +- Change Option *
* * F1 General Help *
* * F10 Save and Exit *
* * ESC Exit *
* * *
* * *
********************************************************************************
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
Figure 8: Console Redirection Configuration.
Console redirection options when feature activated.
Remote Access: enable/disable the console redirection.
Serial port number: select the physical serial port.
Base Address, IRQ: assign the base address and IRQ of the selected port.
Serial Port Mode: select communication speed and protocol.
Flow Control: set the flow control to hardware, software or none.
Redirection after POST: select if the console redirection is always enable, only during
during initialization and boot loader.
Terminal type: select the terminal emulation.
Initialization or
VT-UTF8 Combo Key: allows to use VT-UTF8 combo key also on ANSI and VT100 terminal.
Sredir Memory Display Delay: delay between display memory and console redirection refresh.
Tri-M Technologies Inc. Tel: 800.665.5600, 604.945.9565
1407 Kebet Way, Unit 100 Fax: 604.945.9566
Port Coquitlam, BC V3C 6L3 E-mail: info@tri-m.com
Canada Web site: www.tri-m.com 45