VDX104 Manual - Tri-M Systems Inc.

18-Nov-2010
VDX104 Manual
12.15 Security Configuration
Main Advanced PCIPnP Boot Security Chipset Exit
********************************************************************************
* Security Settings * *
* *************************************************** * *
* Supervisor Password :Not Installed * *
* User Password :Not Installed * *
* * *
* Change Supervisor Password * *
* Change User Password * *
* * *
* Boot Sector Virus Protection [Disabled] * *
* * *
* * *
* * *
* * * Select Screen *
* * ** Select Item *
* * Enter Change *
* * F1 General Help *
* * F10 Save and Exit *
* * ESC Exit *
* * *
* * *
********************************************************************************
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
Figure 17: Security Configuration.
The Security Configuration page allows to protect the BIOS setting with a password.
Supervisor Password: show if a supervisor password was created.
User Password: show if a user password was created.
Change Supervisor Password: create/change the supervisor password.
Change User Password: create/change the user password.
The supervisor password grants access to all the BIOS settings where the user password restricts the
access to some specific BIOS settings. The restriction to some of the BIOS settings by the user is defined at
the BIOS image creation. These restrictions can only be modified on the BIOS image file using the AMIBCP
tool.
Boot Sector Virus Protection: prevent/allow write access to the boot sector.
Tri-M Technologies Inc. Tel: 800.665.5600, 604.945.9565
1407 Kebet Way, Unit 100 Fax: 604.945.9566
Port Coquitlam, BC V3C 6L3 E-mail: info@tri-m.com
Canada Web site: www.tri-m.com 55