VDX104 Manual - Tri-M Systems Inc.

18-Nov-2010
VDX104 Manual
12.7 USB Controller Configuration
Advanced
* USB Configuration * Options *
* *************************************************** * *
* Module Version - 2.24.2-13.4 * Enabled *
* * Disabled *
* USB Devices Enabled : * *
* None * *
* * *
* USB Port 0,1 [Enabled] * *
* USB Port 2,3 [Enabled] * *
* USB 2.0 Controller Mode [HiSpeed] * *
* BIOS EHCI Hand-Off [Enabled] * *
* USB Beep Message [Enabled] * *
* * ** Select Screen *
* * ** Select Item *
* * +- Change Option *
* * F1 General Help *
* * F10 Save and Exit *
* * ESC Exit *
* * *
* * *
********************************************************************************
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
Figure 9: USB Controller Configuration.
This page displays the USB devices detected by the BIOS, configures the USB features supported by the
BIOS and enable/disable the USB controllers.
USB Port 0,1: enable/disable the external USB ports available on the connector CN13.
USB Port 2,3: enable/disable the onboard microSD controller.
USB 2.0 Controller Mode: allows to use the USB 2.0 controller in high speed or full speed.
BIOS EHCI hand-off: enable/disable support for EHCI hand-off feature.
USB Beep Message: generate a beep for each detected device, select enable or disable.
Tri-M Technologies Inc. Tel: 800.665.5600, 604.945.9565
1407 Kebet Way, Unit 100 Fax: 604.945.9566
Port Coquitlam, BC V3C 6L3 E-mail: info@tri-m.com
Canada Web site: www.tri-m.com 46