VDX104 Manual - Tri-M Systems Inc.

18-Nov-2010
VDX104 Manual
12.21 Watchdogs Configuration
Chipset
********************************************************************************
* WatchDog 0 Function [Enabled] * Options *
* WatchDog 0 Signal Select [Reset] * *
* WatchDog 0 Timer [64 Sec] * 1 Sec *
* WatchDog 1 Function [Enabled] * 2 Sec *
* WatchDog 1 Signal Select [NMI] * 4 Sec *
* WatchDog 1 Timer [16 Sec] * 8 Sec *
* * 16 Sec *
* * 32 Sec *
* * 64 Sec *
* * 128 Sec *
* * 256 Sec *
* * *
* * * Select Screen *
* * ** Select Item *
* * +- Change Option *
* * F1 General Help *
* * F10 Save and Exit *
* * ESC Exit *
* * *
* * *
********************************************************************************
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
Figure 23: Watchdogs Configuration.
The WatchDog Configuration page allows to select the event and the delay for each WatchDog when
activated.
WatchDog 0 Function: enable/disable the watchdog timer 0.
WatchDog 0 Signal Select: select the event generated when the watchdog 0 occurs.
WatchDog 0 Timer: set the delay in seconds before the watchdog 0 occurs.
WatchDog 1 Function: enable/disable the watchdog timer 1.
WatchDog 1 Signal Select: select the event generated when the watchdog 1 occurs.
WatchDog 1 Timer: set the delay in seconds before the watchdog 1 occurs.
Tri-M Technologies Inc. Tel: 800.665.5600, 604.945.9565
1407 Kebet Way, Unit 100 Fax: 604.945.9566
Port Coquitlam, BC V3C 6L3 E-mail: info@tri-m.com
Canada Web site: www.tri-m.com 62