INTENSO TAB 1004 - Voelkner

Select `Turn off USB storage´ to deactivate the memory.
Select the function `Remove safely´
computer.
on the computer to separate the device from the
Note: The pre-installed applications and the Android operating system take up some of the existing internal memory. For this reason,
you cannot dispose of the entire internal memory.
8.) Touchscreen
This device is operated via touchscreen. You can easily start applications by tapping the
touchscreen lightly with your fingers, enter texts on the virtual keyboard and switch between the
individual main screens by wiping in the respective direction.
Please remove the protective film from the display before using the device.
The touchscreen detects small electrical charges, as for example emitted by human fingers, and
thus determines the input point.
Use for input ideally your fingertips. Operation with a pen or other sharp objects is not possible.
The touchscreen should not be exposed to water or other electrical devices to avoid malfunctions
and permanent defects.
Notes
a. If the touchscreen is not operated for two minutes, the device goes into standby mode. Briefly press the on / off button to switch to
active mode.
b. To prevent unwanted input, a lock mode is activated automatically. Please unlock the keypad on the touchscreen by simply
dragging the lock icon from the bottom to the top of the screen. The device will now switch to the home screen. Touch the closed
lock on the display and keep it pressed. Draw the lock now to the open lock just appearing on the display and release
your finger from the display. The screen is now unlocked.
You can rotate the device in all directions. It has a sensor that directs the display automatically.
EN - 6