isel-CNC Machine - Bedienungsanleitungen / Manuals isel

isel-CNC Machine CPV
Connecting Lines
To link the machine with your computer, please use the provided cables (for servomotor
control card UPMV 4, multi I/O cards and/or motor cables, diverse control cables). For the
pin assignment of the Sub-D connectors of the CPV without electronics, refer to the Technical
Specifications in Section 7.5.
Connection panel of the CPV with integrated electronics
➀ Connection of confirmation key (9-pin Sub D connector)
➁ UPMV 4/12 (50-pin ribbon connector)
➂ Multi I/O for safety circuit SK (37-pin Sub D connector)
➃ Multi I/O for user I/O (37-pin Sub D connector)
➄ Earthing point
➅ Main switch
➆ Mains connection
➇ Fuse (10 A, slow-blow)
Connection panel of the CPV without electronics
➀ Z axis
(Amphenol connector, C16-3))
➁ X axis
(Amphenol connector, C16-3)
➂ Y axis
(Amphenol connector, C16-3)
➃ A axis (rotary axis)
(Amphenol connector, C16-3)
➄ START and STOP keys
(9-pin Sub D connector)
➅ Cover switch
(9-pin Sub D connector)
➆ POWER / emergency stop button (15-pin Sub D connector)
➇ Earthing point
➈ Input of machine tool
10