isel-CNC Machine - Bedienungsanleitungen / Manuals isel

isel-CNC Machine CPV
Control lines
9-pin sub D connector, START and STOP key (➄ in the illustration on page 9)
Signal Pin Pin Signal
User input 1 6 -
User input 2 7 + 24 V-I/O
Start 3 8 + 24 V-I/O
Stop 4 9 GND 24 V-I/O
connected 5
Sub D-9 connector, cover switch (= H) (➅ in the illustration on page 9)
Signal Pin Pin Signal
H coil + key on 1 6 GND 24 V fuse H coil
H pin 22 2 7 GND 24 V fuse
+ 24 V fuse H pin 2 3 8 GND 24 V fuse
H pin 12 4 9 GND 24 V fuse
+ 24 V-I/O H pin 11 5
Sub D-15 connector, POWER/Emergency stop switch (➆ page 9)
Signal Pin Pin Signal
ON (emergency stop loop) 1 9 ON (emergency stop loop)
Emerg. stop (emerg. stop loop) 2 10 Lamp (in the ON button)
connected 3 11 Lamp (in the ON button)
+ 24 V fuse 4 12 + 24 V fuse
Emerg. stop (emerg. stop loop) 5 13 + 24 V I/O (2-level key-switch)
Key-operated switch 6 14 + 24 V I/O (2-level ON)
ON (2-level info) 7 15 + 24 V I/O (2-level emergency stop)
Emergency stop (2-level info) 8
36