TMC-7DSP/TMC-6DSP Color CCD Camera ... - Site ftp Elvitec
TMC-7DSP/TMC-6DSP Color CCD Camera ... - Site ftp Elvitec
TMC-7DSP/TMC-6DSP Color CCD Camera ... - Site ftp Elvitec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OPERATION<br />
3.1.5 Software Control Features<br />
Most of the <strong>TMC</strong>-<strong>7DSP</strong>/<strong>TMC</strong>-<strong>6DSP</strong>’s functions can be controlled by PC via RS-232C communication<br />
using <strong>TMC</strong>DSP, PULNiX’s proprietary software. Below is a summary of these functions. Detailed<br />
instructions for using the software program will be provided in Section 4, “SOFTWARE<br />
INSTRUCTIONS,” on page 18. For cable information see 2.2.2(f) on page 8.<br />
• Shutter Control<br />
• White Balance Hold<br />
• Y Gain<br />
• Gamma<br />
• Back Light Compensation<br />
• Pedestal<br />
• Aperture<br />
• Hue Control (RYgain, BYgain, RYhue, BYhue)<br />
• Write / Read setting to / from hard disk<br />
• Write / Read setting to / from EEPROM<br />
FIGURE 7.<br />
<strong>TMC</strong>DSP Software Control Panel<br />
3.2 Board Layout and Adjustment<br />
WARNING:<br />
For reference only. Removing the camera cover voids the<br />
warranty.<br />
Page 16<br />
<strong>TMC</strong>-<strong>7DSP</strong>/<strong>TMC</strong>-<strong>6DSP</strong> <strong>Color</strong> <strong>CCD</strong> <strong>Camera</strong>
Change language