Book template - KISSsoft AG

More documents

Recommendations

Info

Chapter 1 I-22 Description of the calculation modules 2.20 P03a Generate a straight -toothed bevel gear (parasolid) Prerequisite: authorization P1 This module generates straight-toothed bevel gears in parasolid form. These can then be viewed in the 3D parasolid display window. 2.21 P04 Generate face gear (parasolid) Prerequisite: authorization P1 This module generates face gears in parasolid form. These can then be viewed in the 3D parasolid display window. 2.22 P05 Generate a globoid worm gear (p arasolid) Prerequisite: authorization P1 This module generates globoid worm gears in parasolid form. These can then be viewed in the 3D parasolid display window. 2.23 K07 user database (materials etc.) You can extend or change any data, such as materials, geometry data, toothing profile via the user database. One of <strong>KISSsoft</strong>'s appealing features is that changes to material data also automatically become active in every calculation that has already been saved. 2.24 K7a material management (always pr e- sent) Module in which you input additional materials and where you change specific data of materials that are already present. 2.25 K7b Smith-Haigh diagram Prerequisite: authorization W03, W06 This authorization allows you to display a Smith and Haigh diagram for a specific material. It can only be displayed as part of a shaft calculation. You can display a notched part. In the graphic you can select the cross-section as well as the stress components bending, tension/compression or torsion.
Chapter 1 I-23 Description of the calculation modules 2.26 K09 Hardness Conversion (in the Extras menu) Convert hardness data in accordance with Vickers, Brinell and Rockwell. 2.27 K10 Calculating tolerances Calculate the total measurement of chain dimensions for the elements you input. You can define the tolerances either as a general tolerance (DIN ISO 2768, DIN 7168) with inputs specified in ISO in the tolerance field or use your own values. This calculation uses a constant distribution (arithmetical sum) and the root mean square of the tolerances (standard distribution) to define the whole tolerance field. 2.28 K12 Strength analysis with local stresses (FKM guideline) The proof of static and fatigue strength (limited life time or endurance) with elastically calculated local stresses as specified in FKM guideline 183 (4th Edition) for non-welded parts. Based on stresses in critical points that are calculated using an FE program, you can use this method to calculate a complete proof of strength with safety against fracture or against the yield point and a safety against fatigue fracture. You can also perform this calculation with load spectra.
Page 1: aa KISSSOFT RELEASE 03/2011 PRODUCT
Page 5 and 6: Inhalt Table of Contents I Descript
Page 7 and 8: Inhalt 3.25 W07b calculation accord
Page 9 and 10: Inhalt 6.31 Z05d Calculate the toot
Page 11 and 12: Inhalt 7.2 Z91 Toothed belts (Z091)
Page 13 and 14: Chapter 1 I-13 Description of the c
Page 21: Chapter 1 I-21 Description of the c
Page 73 and 74:
Chapter 1 I-73 Description of the c
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Chapter 1 I-101 Description of the
Page 103 and 104:
Chapter 1 I-103 Description of the
Page 105 and 106:
II Inde x Chapter 1 II-105 Descript
Page 107 and 108:
Chapter 1 II-107 Description of the
Page 109 and 110:
Page 111:
show all

Book template - KISSsoft AG

Create successful ePaper yourself

Delete template?

Save as template?