Book template - KISSsoft AG

More documents

Recommendations

Info

Chapter 1 I-42 Description of the calculation modules permissible material stress. Input the values for surface roughness with qualities defined in ISO 1302. You can define a hub with varying outside diameter in <strong>KISSsoft</strong> to calculate cylindrical and conical interference fits. In such cases, input the outside diameter section by section with the diameter and length. The system then derives an equivalent diameter from these values (as specified by V. Gross) and includes it in the calculation.
Chapter 1 I-43 Description of the calculation modules 4.4 M01c clamped connections There are two different configurations of clamped connections that can be calculated: Slotted hub Split hub The surface pressure and safety against sticking are calculated in accordance with the classic literature (Roloff Matek, Machine elements, 15th Edition, 2001). Bending is calculated as specified by Decker, Machine elements, 15th Edition, 2000. 4.5 M02a Key / Key way For keys as defined in: DIN 6885.1 DIN 6885.2 DIN 6885.3 ANSI B17.1 Square ANSI B17.1 Rectangular Own definition a calculation is performed to find the load on the shaft and hub (surface pressure) and the key (shearing) and also defines the safeties (calculation method: DIN 6892 (1998) method C). The calculation takes into account the tolerances of the key radii and the direction of force. You can also enter your own value for the number of keys and the operating factor. Scale graphic representation Key calculation as specified by DIN 6892 (1998) method B: This standard uses very clearly defined calculations for keys under constant and peak load. For example, it also includes the situation where an interference fit is present. You can input this data in a sub dialog: Chamfer on shaft and the hub; smaller and larger outside diameter of the hub; width to outside diameter; distance; torque curve; frequency of load direction change. Sizings: Determine the load bearing length of the shaft or hub on the basis of target safety and determine the transmissible torque.
Page 1: aa KISSSOFT RELEASE 03/2011 PRODUCT
Page 5 and 6: Inhalt Table of Contents I Descript
Page 7 and 8: Inhalt 3.25 W07b calculation accord
Page 9 and 10: Inhalt 6.31 Z05d Calculate the toot
Page 11 and 12: Inhalt 7.2 Z91 Toothed belts (Z091)
Page 13 and 14: Chapter 1 I-13 Description of the c
Page 41: Chapter 1 I-41 Description of the c
Page 93 and 94:
Chapter 1 I-93 Description of the c
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Chapter 1 I-101 Description of the
Page 103 and 104:
Chapter 1 I-103 Description of the
Page 105 and 106:
II Inde x Chapter 1 II-105 Descript
Page 107 and 108:
Chapter 1 II-107 Description of the
Page 109 and 110:
Page 111:
show all

Book template - KISSsoft AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?