Book template - KISSsoft AG

More documents

Recommendations

Info

Chapter 1 I-50 Description of the calculation modules Sizing the solder width (for shaft hub), or the solder length (for brackets), on the basis on the strength of the underlying material. The tear resistance of the connection is set so that it corresponds to the tear resistance of the underlying material or the fatigue strength under pulsating stress of the shaft. Sizing the solder width on the basis of stress: The tear resistance of the joint is sized so that it can withstand the forces it is subjected to without compromising the specified safety.
Chapter 1 I-51 Description of the calculation modules 5 Springs - F-module 5.1 F01 compression springs calcul ation Calculation of cylindrical stressed compression springs, as specified in EN 13906- 1. Includes the sizing (by inputting the compression forces and assembly masses) and the verification of compression springs. Database with the most important spring materials. Displays the spring characteristic line, the relaxation, the progression of relaxation over time, the progression of spring force over time and the Goodman diagram for dynamically loaded springs. Tolerances and main mass specified in DIN 2076, 2077, 2096, 2097, EN 10270-1. Integrated database with spring geometries specified in DIN 2098 sheet 1. 5.2 F02 tension spring calculation Calculation of cylindrical tension springs in accordance with EN 13906-2. Contains the sizing (by inputting the compression forces and assembly dimensions) and the verification of tension springs. Database with the most important spring materials. Database with wire diameters as specified in DIN 2076, 2077, EN 10270-1. Display the spring characteristic line, Goodman diagram for dynamically loaded springs. Tolerances, main mass, eyes specified in DIN 2076, 2077, 2096, 2097, EN 10270-1. 5.3 F03 Leg spring calculation Calculation of cylindrical rotating springs in accordance with EN 13906-3. Contains the sizing (by inputting the compression forces and assembly dimensions) and the verification of leg springs. Database with the most important spring materials. Database with wire diameters as specified in DIN 2076, 2077, EN 10270-1. Display the spring characteristic line. The leg can either be clamped in a fixed position, supported, tangential or bent. Tolerances specified in DIN 2076, 2077, EN 10270-1. 5.4 F04 disk spring calculation Calculation of disk springs and spring packages as specified in DIN 2092. Contains the sizing (by inputting the compression forces and assembly dimensions) and the verification of disk springs. Database with material characteristic values and dimensions specified in DIN 2093. Display the spring characteristic line, Goodman diagram.
Page 1: aa KISSSOFT RELEASE 03/2011 PRODUCT
Page 5 and 6: Inhalt Table of Contents I Descript
Page 7 and 8: Inhalt 3.25 W07b calculation accord
Page 9 and 10: Inhalt 6.31 Z05d Calculate the toot
Page 11 and 12: Inhalt 7.2 Z91 Toothed belts (Z091)
Page 13 and 14: Chapter 1 I-13 Description of the c
Page 49: Chapter 1 I-49 Description of the c
Page 101 and 102:
Chapter 1 I-101 Description of the
Page 103 and 104:
Chapter 1 I-103 Description of the
Page 105 and 106:
II Inde x Chapter 1 II-105 Descript
Page 107 and 108:
Chapter 1 II-107 Description of the
Page 109 and 110:
Page 111:
show all

Book template - KISSsoft AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?