Book template - KISSsoft AG
Book template - KISSsoft AG
Book template - KISSsoft AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 1 I-44 Description of the calculation modules<br />
4.6 M02b Straight-sided spline/ Multi-groove<br />
profile<br />
For multi-groove profiles specified in:<br />
DIN ISO 14 (light series)<br />
DIN ISO 14 (medium series)<br />
DIN 5464 (vehicles, heavy series)<br />
DIN 5471 (machine tools, with 4 keys)<br />
DIN 5472 (machine tools, with 6 keys)<br />
a calculation is performed to find the load placed on the shaft and hub (surface<br />
pressure). You can also add additional standards. The calculation of the load placed<br />
on the shaft and hub (surface pressure) together with determining the safeties is<br />
performed in accordance with the "classic technical literature" (Niemann, Maschinenelemente<br />
I, 4th Edition, 2005). Scale graphic representation.<br />
Sizings:<br />
Determine the load bearing length of the shaft or hub on the basis of target<br />
safety and<br />
determine the transmissible torque.<br />
4.7 M02c Spline<br />
For splines defined in:<br />
DIN 5480<br />
DIN 5481<br />
DIN 5482<br />
ISO 4156 (1991)<br />
ANSI B92.1 and ANSI B92.2 (1992)<br />
a calculation is performed to find the load placed on the shaft and hub (surface<br />
pressure). You can also add additional standards. Toothing data is defined in the<br />
database and therefore you can make the use of in-house profiles mandatory. Use<br />
module Z09 of the gear calculation to calculate manufacturing data and tolerances.<br />
The calculation of the load placed on the shaft and hub (surface pressure) together<br />
with determining the safeties is performed in accordance with the "classic technical<br />
literature" (Niemann, Maschinenelemente I, 4th Edition, 2005).<br />
Sizings: