You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PRESET DEFINITION<br />
Address Name Range (Decimal)<br />
(Hex)<br />
00 Model Selection High nib is Cabinet Model, 0-7<br />
Low nib is Amp Model, 0-7<br />
Clockwise rotation for both nibs:<br />
0 = Red / 2x10<br />
1 = 360 / 1x18<br />
: : :<br />
7 = Freddie K / Alloy 4x10<br />
01 Hardware Control Bits 0-3,7 = <br />
4 = Compressor On<br />
5 = Analog Overdrive On<br />
6 = Tweeter On<br />
02 0<br />
03,04 Pre Gain (non-boost, boost) 1-33 (active when Analog Overdrive<br />
enabled)<br />
05,06 Low (non-boost, boost) 1-33<br />
07,08 Mid (non-boost, boost) 1-33<br />
09,0A Mid Shift (non-boost, boost) 1-33<br />
0B,0C High (non-boost, boost) 1-33<br />
0D,0E Post Gain (non-boost, boost) 0-33 (0 = reverb off)<br />
0F,10 0<br />
11,12 Speed/Adj (primary/off, secondary/on) 1-25<br />
13,14 Depth (primary/off, secondary/on) 0-25 (0 = modulation off)<br />
15 Effect Type 0-7 = Chorus, Flanger, Phaser,<br />
Octave, Synth, Fretless, Funk Wah,<br />
Distortion<br />
16 Effect Tweak 1 1-25; 255=no tweak *(see below)<br />
17 Effect Tweak 2 1-25; 255=no tweak *(see below)<br />
18-1D 0<br />
1E EFX Mode Status Bits (Soft) High nib is <br />
Low nib is EFX mode status:<br />
Bit 0 is Boost (on/secondary = high)<br />
Bit 1 is <br />
Bit 2 is Effect On (on = high)<br />
Bit 3 is Effect Alt. (on/secondary = high)<br />
Values are automatically set with effect selection, adjust after to tweak. Available tweaks are shown in table below.<br />
Tweak 1 Tweak 2<br />
Chorus - Crossover Frequency<br />
Flanger Delay Time Crossover Frequency<br />
Phaser - -<br />
Octave Tone -<br />
Synth Frequency Resonance<br />
Fretless Frequency Resonance<br />
Funk Wah Frequency Resonance<br />
Distortion Low Rolloff Dry Level<br />
38