You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
prior to your purchase. If you be<strong>com</strong>e dissatisfied with your user presets at any time, reinitialization<br />
will return all user presets to the factory settings.<br />
Suppose you like factory setting A 1 but desire more low frequency response. Press the USER<br />
button on the front panel. Since the unit has been reinitialized, user preset A 1 is the same as<br />
factory preset A 1. Now simply adjust the low frequency to your liking and press STORE twice. The<br />
increased low-frequency setting will be called up whenever user preset A 1 is selected. If a factory<br />
preset is changed and not stored as a user preset, it will revert back to the factory setting once the<br />
next preset is selected.<br />
Both the factory and user presets are stored in the PRESET MATRIX. This matrix is divided into 4<br />
banks (A, B, C, D), with each bank containing 4 presets (1, 2, 3, 4). Selection between factory and<br />
user presets is ac<strong>com</strong>plished with the USER switch. Storage location within the matrix is selected<br />
using the STORE switch. Detailed description of the matrix and its controls is included in the<br />
following section.<br />
FRONT PANEL<br />
FEATURES AND CONTROLS<br />
2 6 7 9 11 15<br />
19 22<br />
1 3 4 5 8 10 12 13 14 16 17 18 20 21<br />
(1) INPUT<br />
This 1/4" mono (TS) jack is a high-impedance input designed to handle a broad range of bass<br />
pickup signals, both active and passive.<br />
(2) INPUT TRIM<br />
This control adjusts the level of the signal entering the INPUT (1). Instruments with high<br />
output levels may have to be “trimmed” down to avoid overdriving (distorting) the INPUT.<br />
(3) SIG/CLIP<br />
This 2-color LED indicates signal presence as well as warning of clipping the INPUT (1).<br />
Green illumination will occur in response to signal presence at the INPUT, while red<br />
illumination warns of potential clipping. Excessive red illumination indicates a need to adjust<br />
the INPUT TRIM (2).<br />
(4) PRESET MATRIX<br />
This control, along with the USER (5) switch, allows selection among the 32 available<br />
presets. The matrix is divided into 4 banks (A, B, C, D), with each bank containing 4 presets<br />
(1, 2, 3, 4). Depending on the position of the USER switch, the PRESET MATRIX selector<br />
allows selection of the 16 factory presets or the 16 user presets. The active preset is<br />
indicated by LED illumination. Presets can also be selected via the foot controller or by MIDI<br />
<strong>com</strong>mand.<br />
4