BAM 210 Operation Manual - Peavey.com

een selected via the MODEL SELECTOR (12) control, pressing this button allows the user
to change cabinets without altering the amplifier selection. For example, the current model is
B-MAN 2X12. To hear this amp through a 1X15, press the CAB SWAP button. The adjacent
green LED will illuminate to indicate Cab Swap mode. Rotate the MODEL SELECTOR switch
to the FLIPTOP 1X15 setting. The sound is now B-MAN 1X15 (amp model B-MAN; cab
model 1X15). See the chart below for a description of cabinet characteristics.
Amp Model Cabinet Model Description
RED 2 X 10 Modern 2 X 10 combo amp
with active semi-parametric
EQ. Front ported cab with
horn.
360 1 X 18 Old solid state head with
passive EQ. Single 18 inch
folded horn cab.
TVS 8 X 10 Vintage all tube head with
passive EQ. Sealed 8 X 10
cab with no horn.
FLIPTOP 1 X 15 Vintage all tube portable
bass combo with passive
EQ. 1 X 15 cab.
B-MAN 2 X 12 Classic all tube bass head
with 3-band passive EQ.
Closed back 2 X 12 cab.
PEAVEY MAX BAM 2 X 10 Hybrid bass preamp with
active 3-band semi-parametric
EQ. BAM cab with
no modeling.
WEST COAST 4 X 10 Modern hybrid bass head
with active semi-parametric
EQ. Modern front ported
4 X 10 with horn.
FREDDIE K ALLOY 4 X 10 Modern solid state head
with active 4-band EQ.
Metal cone speakers in
ported 4 X 10 with no
tweeter.
(14) PRE GAIN
This control sets the BAM’s preamp gain when the amp model has a pre-gain function
associated with it. Rotating the control clockwise increases gain. The setting of this control
will modify a preset, and the new setting can be saved as a user preset. If the LEDs
surrounding this control do not illuminate, the amp model has no pre-gain function. Pre gain
function can be added (or removed) in tweaks. See the TWEAK / TUNER POWER
FEATURES section of this manual for tweak instructions.
6