Industrial shaft seals

gab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21,
Industrial
факс
shaft seals
(495) 22
5. Shaft
5.1 Diameter (d 1 ): min: mm max: mm
5.2 Material:
5.3 Type of surface: Hardness:
5.4 Surface roughness: R a µm R z µm R max. µm
5.5 Chamfer/transition:
5.6 Shaft rotation (where applicable): Speed: r/min min: r/min max: r/min
Direction of rotation: N clockwise N anti-clockwise N alternating
Oscillation: Angle of oscillation degrees Frequency r/min
6. Housing
6.1 Bore diameter (d 2 ): min: mm max: mm
6.2 Depth of bore (width): min: mm max: mm
6.3 Material:
6.4 Surface roughness: R a µm R z µm R max. µm
6.5 Chamfer/transition:
6.6 Housing rotation (where applicable): Speed: r/min min: r/min max: r/min
Direction of rotation: N clockwise N anti-clockwise N alternating
Oscillation: Angle of oscillation degrees Frequency r/min
7. Seal
7.1 Design/type:
7.2 Material: Shell/outside diameter: Seal lip:
7.3 Additional requirements: N Bore-Tite N Shaft wear sleeve
8. Quantity
8.1 Once only: N Number of seals:
8.2 Continuous: N Number of seals per annum:
8.3 Supply date:
8.4 Other information:
gab.ru Берг АБ bergab@ya.ru Тел. (495)-228-06-21, факс (495) 47 22