symbolic dynamic models for highly varying power system loads

61
[1] M. S. Chen, “Determining load characteristics for transient performances,” vol. 3:
Procedure for modeling power system loads, Electric Power Research Institute El-849,
Project 849-3, final report, Palo Alto, CA, May 1979.
[2] Y. Wang, N. C. Pahalawaththa, “Power system load modeling,” Proceedings of
International Conference on Power System Technology, POWERCON '98, vol. 1 pp. 725
–729.
[3] Q. H. Wu, J. Y. Wen, “Measurement based power system load modeling by
learning,” UKACC International Conference on Control '98, vol. 1, pp. 871 –876.
[4] P. Ju, E. Handschin, D. Karlsson, “Nonlinear dynamic load modeling: model and
parameter estimation,” IEEE Transactions on Power Systems, vol. 11, issue 4, Nov. 1996,
pp. 1689 –1697.
[5] Ma Da-Qiang, Ju Ping, “A novel approach to dynamic load modeling,” IEEE
Transactions on Power Systems, vol. 4, no. 2, May 1989.
[6] D. N. Salem, “A Markov approach to power system load modeling,” Masters
Thesis, Arizona State University, Tempe AZ, Dec. 2000.
[7] M. Takeda, T. Aritsuka, “Practical applications of active filters for power
conditioning in distribution networks,” Proceedings of 8th International Conference on
Harmonics and Quality of Power, 1998, vol. 1, pp. 304 –309.
[8] J. Nastran, R. Cajhen, M. Seliger, P. Jereb, “Active power filter for nonlinear AC
loads,” IEEE Transactions on Power Electronics, vol. 9, issue 1, Jan. 1994, pp. 92 –96.