AT-3624TR/3648TR Installation Manual - Allied Telesis
AT-3624TR/3648TR Installation Manual - Allied Telesis
AT-3624TR/3648TR Installation Manual - Allied Telesis
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Hardware <strong>Installation</strong><br />
In addition to the AUI interface, optional appliqués are available for<br />
connection with fiber optic (ST, SC, or SM), thinnet (BNC) or UTP (RJ45)<br />
cabling. Figure 8 shows the available (appliqué faceplates.<br />
<strong>AT</strong>-A1 (SMA)<br />
<strong>AT</strong>-A2 (SC)<br />
<strong>AT</strong>-A3 (ST)<br />
<strong>AT</strong>-A5 (AUI)<br />
Figure 8: Network Appliqués<br />
<strong>AT</strong>-A8 (BNC)<br />
<strong>AT</strong>-A9 (10BASE-T)<br />
Note<br />
During the swap-out of an appliqué, it is advisable to turn off the power since<br />
you will be removing screws and inserting metal parts into the appliqué opening.<br />
You can combine any hub model with any of the six network port<br />
appliqués shown in Table 2.<br />
Table 2: <strong>AT</strong>l Network Port Appliqués<br />
Suffix<br />
Network Interconnect Appliqué<br />
-x1 SM/SMA Fiber Optic Port<br />
-x2 SC Fiber Optic Port<br />
-x3 ST Fiber Optic Port<br />
-x5 AUI Port<br />
-x8 BNC Port<br />
-x9 RJ45 Port<br />
12
![AT-8100L/8POE-E [Rev B] - Allied Telesis](https://img.yumpu.com/25714603/1/190x245/at-8100l-8poe-e-rev-b-allied-telesis.jpg?quality=85)
Change language