RTS200 RFID Test Set - RFID Webshop

The test suite structure is described in the tree on the left of the screen. The root of the tree is the
test suite (Read_Data_ISO15693 in the example), while the branches correspond to individual
tests (Read Tag Data, Resonant Frequency and Q Factor in the example).
There is also a machine interface configuration file, which includes all the information needed for
the RTS200 to interface with the machine where it is operating. Parameters defining the hardware
signals used to control the operation, time characteristics …
Selecting an item on the tree (the test suite or an individual test), makes it possible to see in the
right side of the window the properties associated with the element. There are three different types
of properties. They can be seen selecting the corresponding tab page on the screen.
Property Type
Identification
Test Conditions
Test Limits
Explanation
The name, date, comments, ... corresponding to the test suite or individual test are defined here. The
parameter name and number are open, so the user can add as many identificative properties as
needed.
The conditions of the test are described here. This corresponds to values needed for some operating
parameters. For instance, the RX frequency, the number of samples to take, ... The conditions also
correspond to configuration parameters on the Tag Analyzer screen.
These are the limits to consider a test result to be valid or not. When the test result falls between the
limits, a PASS indication appear in Tag Analyzer mode, and the result is considered valid in Online
mode. Other parameters defined here are used to control the appearance of the data results in the
online test screen.
The Test conditions and Test limits have special Keywords for the parameters. The keywords can
not be changed. ANNEX 2 describes those pre-defined keywords. More keywords can be added in
the future if more parameters have to be changed for different tests.
Pag: 25 Document: RTS200 RFID Test Set Code: 001.0036 Version: 1