7800 Controller - User Manual - Scott Safety
7800 Controller - User Manual - Scott Safety
7800 Controller - User Manual - Scott Safety
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Model <strong>7800</strong> <strong>User</strong>s <strong>Manual</strong><br />
Revision E<br />
Figure 3.8<br />
3.1.7a CLOCK / PRINTER SYSTEM SET-UP MENU<br />
Detection of the 093-0338 on the I2C bus causes the Clock/Printer System Setup menu<br />
item to appear. Selecting it and pressing EDIT brings up the menu shown at right in<br />
Figure 3.9. Date / Time menu entries allow setting of correct local time and date. The<br />
ALARM PRINT ON/OFF entry allows printing to be discontinued if turned to OFF.<br />
PORT allows selection of RS-232, RS-422 or the parallel port. With only one port able<br />
to be activated at a time. BUFFER DUMP allows immediate printing of all the 30-35<br />
stored events. PRINT CONFIG allows immediate printing of all channel variables such<br />
as channel ID’s, Engrg. Units etc. PRINTER READY / ERROR indicates the<br />
functional status of the printer.<br />
<strong>Scott</strong> <strong>Safety</strong> 29 087-0021 Rev F
Change language