7800 Controller - User Manual - Scott Safety

More documents

Recommendations

Info

Model 7800 Users Manual Revision E 6.2 093-0279 NEMA 4X WALL MOUNT FIBERGLASS ENCLOSURE The MODEL 7800N4 shown in Figure 6.2 is a fiberglass NEMA 4X wall mount enclosure. Seven, 8 channel I/O option PCB’s, such as analog input or discrete relays, may be mounted inside this enclosure. It is suitable for mounting outdoors but an above mounted weather deflector shield is recommended. Weight is approximately 17 pounds. Figure 6.3 provides important warning information concerning correct grounding procedures for non-metallic enclosures. Conduit entries are not provided so installers may place entries as needed. Bottom or lower side areas are recommended. Care must be taken to avoid drilling into circuit boards mounted inside the enclosure. Properly ground the enclosure and follow national and local electrical codes. Figure 6.2 Scott Safety 39 087-0021 Rev F
Model 7800 Users Manual Revision E Figure 6.3 Scott Safety 40 087-0021 Rev F
Page 1 and 2: Model 7800 Users Manual Revision E
Page 43: Model 7800 Users Manual Revision E
Page 50: MODEL 7800 Controller Users Manual

7800 Controller - User Manual - Scott Safety

Create successful ePaper yourself

Delete template?

Save as template?