DV-533 DV-533K - Service.pioneer-eur.com - Pioneer Europe

STANDBY/ON
MIC
VOLUME
MIN–MAX
ECHO
MIN–MAX
41
5
¡¢
5
Î
DVD PLAYER
GETTING STARTED USING YOUR DVD PLAYER
Resuming playback from
where you stopped
– DVD/Super VCD/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
This features cannot be used with MP3s and CDs.
Press STOP 7 once.
The display shows “RESUME” and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP 7 twice causes the disc to return to
the beginning when PLAY 3 is pressed again. The
display shows the disc type (DVDs or Super VCDs/
Video CDs).
Press PLAY 3.
Playback starts from the resume position.
Stopping Playback and
Switching Power Off
– DVD/Super VCD/Video CD/CD/MP3
4
1
AUDIO
PREV
4
STOP 7
eSTEP/SLOWE
1
4
7
RANDOM
LAST
MEMORY
SUB TITLE
2
5
8
CONDITION
MEMORY
ANGLE
SETUP MENU TOP MENU
DISPLAY
5
2
ENTER
∞
5
PLAY 3 PAUSE 8
1REV FWD ¡
3
6
9
PROGRAM SEARCH MODE
REPEAT
3
OPEN/
CLOSE
REPEAT
A-B
RETURN
NEXT
¢
CLEAR
+10
0
Î
2
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 48).
4 2 3 1
DV-533K
7 8
0 3
1 Press STOP 7 (7 on the front panel).
Playback stops.
2 Press OPEN/CLOSE (0 on the front panel).
The disc tray comes out.
3 Remove the disc.
4 Press ( STANDBY/ON on the front
panel ).
The disc tray goes back in.
23
En