DV-533 DV-533K - Service.pioneer-eur.com - Pioneer Europe

Setting the Parental Lock Level
Change the Parental Lock level to a higher or lower level
according to the settings printed on the DVD disc jacket
or accompanying documentation. If you use the
Condition Memory function to save the settings for a
particular disc, the Parental Lock level is saved as well.
Because it is saved in memory, Parental Lock levels can
be set for individual discs according to their content
rather than a set level for all DVDs.
1 Select [Level] in the [Parental Lock] setting
and press ENTER.
The screen changes to the password input screen.
To enter the password, refer to ‘Entering the
Password’ on the previous page.
You cannot select [Level] until you have registered
a password.
2 Use the cursor buttons (2/3) to adjust the
Parental Lock Level.
The lock icons appear “unlocked” up to the
selected level to indicate that access is available.
Audio1 A2 Video1 V2 Language
Parental Lock: Level Change
Set Parental Lock Level
Move
General
Level 1 2 3 4 5 6 7 8 Off
RETURN
ENTER Select SETUP
Return
Exit
3 Press ENTER to set the new level.
The new Parental Lock level is set and the screen
returns to the General menu screen. To go back to
the General menu screen without making any
changes, press RETURN.
Changing the Password
Change your password whenever you feel it is
necessary. However, if you forget your existing
password, you cannot enter this screen to change it.
1 Select [Password Change] in the [Parental
Lock] setting and press ENTER.
The screen changes to the password input screen.
To enter the password, refer to ‘Entering the
Password’ on the previous page.
2 Use the cursor buttons (2/3/5/∞) or the
number buttons to enter the new
password.
Setting the Country Code
Change your Country Code whenever you feel it is
necessary. However, if you forget your existing
password, you cannot enter this screen to change it.
1 Select [Country Code] in the [Parental
Lock] setting and press ENTER.
The screen changes to the password input screen.
To enter the password, refer to ‘Entering the
Password’ on the previous page.
The Country Code selection screen appear.
Audio1 A2 Video1 V2 Language General
Country Code
List of Codes Code (0~2)
us
Setup Country Code
+/–
Move
2 1 1 9
RETURN Return
ENTER Select SETUP Exit
2 Use the cursor buttons (2/3) to select
either “List of Codes” or “Code”.
3 If you select “List of Codes”, use the cursor
buttons (5/∞) to select the country.
For country codes which are only shown as a code,
please refer to ‘Country Code List’ on page 53.
List of Codes
us
If you select “Code”, use the cursor
buttons (5/∞) to input the numbers of the
input code.
Use the cursor buttons (2/3) to change the
position of the cursor. You can also use the
number buttons to enter the code.
Code (0~2)
2 1 1 9
4 Press ENTER to set the new Country Code.
To exit the screen without making any changes,
press RETURN.
3 When the new password has been
entered, press ENTER.
The new password is set and the screen returns to
the General menu screen. To go back to the
General menu screen without making any changes,
press RETURN.
52
En