DV-533 DV-533K - Service.pioneer-eur.com - Pioneer Europe

More documents

Recommendations

Info

Adjusting the picture quality settings To create your own setting (1) 1 Use the cursor button (3) to select [Start] then press ENTER. 6 Repeat steps 4 and 5 to make adjustments to other settings. If you would like to save the settings in the player’s memory, be sure to select either [1], [2], or [3] in the [Memory] setting to establish which memory location to save the new settings in. Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones. Video Memory Select Video Setup 2 Use the cursor button (∞) to select [Video Setup] then press ENTER. Memory Move Off 1 2 3 ENTER Select DISPLAY Check Video Memory Select Video Setup 7 When you are finished making adjustments, press ENTER to establish the new settings. 3 Use the cursor buttons (2/3) to select the setting to [On] or [Off]. To create your own setting (2) 1 Use the cursor button (3) to select [Start] then press ENTER. Fine Focus On Off Move ENTER Select DISPLAY Check Video Memory Select Video Setup 4 Use the cursor buttons (5/∞) to select the setting to adjust. You can adjust any or all of the following picture quality factors: Fine Focus Switch on to reveal greater detail (higher resolution) in the picture. Contrast Adjusts the contrast of the elements in the picture. Sharpness Adjusts the sharpness of the mid-frequency (less detailed) elements in the picture. (This setting is only effective when [Fine Focus] is [On].) Chroma Level Adjusts how saturated colours appear. Hue Adjusts the overall colour balance between red and green. (This is only effective when the player is connected using the VIDEO OUT or S-VIDEO OUT jacks.) 5 Use the cursor buttons (2/3) to adjust the settings. Adjust these while a disc is playing to see the effect of changes immediately. 2 Use the cursor button (∞) to select [Video Setup] and press ENTER. 3 Press DISPLAY. Fine Focus Contrast Sharpness Chroma Level Hue Memory On Off min max soft fine min max green red Off 1 2 3 4 Use the cursor buttons (5/∞) to select the setting and use the cursor buttons (2/3) to adjust the settings. Adjust these while a disc is playing to see the effect of changes immediately. 5 To memorize the setting, select [Memory1, 2, 3], then press ENTER. The previous setting will be erased. 32 En
5 ADJUSTING AUDIO AND VIDEO SETTINGS Viewing from a Desired Camera Angle (Multi-Angle) – DVD You can select a camera angle when viewing DVDs with the multi-angle option. PREV 4 AUDIO LAST MEMORY SUB TITLE CONDITION MEMORY Press ANGLE during playback. The camera angle changes each time you press the button. ANGLE SETUP MENU TOP MENU DISPLAY 5 2 ENTER Angle : 1/4 Angle : 2/4 ∞ 5 \ REPEAT 3 OPEN/ CLOSE REPEAT A-B 5 RETURN NEXT ¢ ANGLE To check whether or not a disc is recorded with angles The jacket of discs that are recorded with angles will be marked with . When locations on discs that are recorded with angles are played back, the indicator can be displayed. To cancel the angle mark, set [Angle Indicator] to [Off] in the Setup screen Video 2 menu described in the section below. Turning the angle indicator on and off Expert When a picture recorded in different angles is played back is displayed on the screen. This setting lets you see clearly whether the playback picture is recorded in multiple angles or not. Turn the angle indicator on or off in the [Angle Indicator] setting in the Setup screen Video 2 menu in the [Expert] menu mode (page 25). Audio1 A2 V1 Video2 Language General Background — Pioneer Logo Video Adjust Still Picture — Auto On Screen Display — Position-Normal Angle Indicator — On Off Move SETUP Exit » « Settings: On* ( is displayed) Off (Not Displayed) *Factory setting Angle : 4/4 Angle : 3/4 | Note Even when the [Angle Indicator] setting is set to [Off], the indicator in the display panel of the player lights during multi-angle playback. Therefore, it is possible to know when the multi-angle function can be used without having to display the icon on the screen. Notes • You can use the Multi-Angle function only with discs featuring recordings of images shot from different camera angles. • During Multi-Angle playback, the indicator in the display lights. • For some discs, selection can be made using the DVD menu. In this case, press MENU to display the DVD menu screen and then make your selection. 33 En
Page 1 and 2: DVD PLAYER DV-533 DV-533K Operating
Page 3 and 4: Features of This Player Compatible
Page 5 and 6: Wide range of DVD viewing options M
Page 7 and 8: Table of contents Before Using ....
Page 9 and 10: BEFORE USING/NAMES AND FUNCTIONS Na
Page 11 and 12: NAMES AND FUNCTIONS Rear Panel DV-5
Page 13 and 14: NAMES AND FUNCTIONS - STOP 7 button
Page 15 and 16: CONTROL IN VIDEO OUT COMPONENT VIDE
Page 17 and 18: STANDBY/ON MIC VOLUME MIN-MAX ECHO
Page 19 and 20: SETTING UP THE PLAYER Setting digit
Page 21 and 22: 5 GETTING STARTED USING YOUR DVD PL
Page 23 and 24: STANDBY/ON MIC VOLUME MIN-MAX ECHO
Page 25 and 26: 5 ADJUSTING AUDIO AND VIDEO SETTING
Page 27 and 28: ADJUSTING AUDIO AND VIDEO SETTINGS
Page 29 and 30: ADJUSTING AUDIO AND VIDEO SETTINGS
Page 31: ADJUSTING AUDIO AND VIDEO SETTINGS
Page 35 and 36: SETTING THE LANGUAGE OPTIONS Changi
Page 37 and 38: 5 SETTING THE LANGUAGE OPTIONS When
Page 39 and 40: 5 SETTING THE LANGUAGE OPTIONS/ADVA
Page 41 and 42: 5 ADVANCED FUNCTIONS Using the MP3
Page 43 and 44: 5 ADVANCED FUNCTIONS Random Play -
Page 45 and 46: 5 ADVANCED FUNCTIONS Programming Su
Page 47 and 48: ADVANCED FUNCTIONS To make a progra
Page 49 and 50: 5 ADVANCED FUNCTIONS Memorizing Set
Page 51 and 52: ADVANCED FUNCTIONS Setting the Pare
Page 53 and 54: ADVANCED FUNCTIONS Country Code Lis
Page 55 and 56: ADVANCED FUNCTIONS Super VCD CD cur
Page 57 and 58: ADDITIONAL INFORMATION Avoid heat D
Page 59 and 60: ADDITIONAL INFORMATION Troubleshoot
Page 61 and 62: ADDITIONAL INFORMATION Terms Aspect
Page 63 and 64: ADDITIONAL INFORMATION Specificatio

DV-533 DV-533K - Service.pioneer-eur.com - Pioneer Europe

Create successful ePaper yourself

Delete template?

Save as template?