success is... - DENTSPLY Friadent

5_Three SynCone copings and one
sulcus former were used for the
temporary restoration
6_X-ray check with copings and
sulcus former
9_Master cast with gum mask 10_Customizing the Balance
posterior copings
7_Temporary denture fixed with
three SynCone caps
In particular, use of the Cercon technique (DeguDent, Hanau/Germany) in combination
with Galvano Solaris (DeguDent, Hanau/Germany) enables an accurate,
esthetic procedure with predictable fit and a natural appearance. Zirconium
oxide is an excellent material with high esthetic and biological potential, and the
desired perfect seating can be achieved in every restoration with Galvano mesial
constructions.
CASE STUDY
The 57-year-old patient, a computer expert in an executive position, presented
with severe pain. Advanced periodontitis in the lower jaw resulted in teeth becoming
loose, serious infections with permanent pain and gum bleeding. The teeth
were evaluated as not worth retaining after clinical and x-ray diagnosis.
TREATMENT PLAN AND PROCEDURE
The patient wanted a fixed restoration in the lower jaw. A new bridge construction
was also planned for the upper jaw. The time available for treatment was limited
because of the patient’s professional obligations. The surgery in the lower jaw
with temporary restoration and treatment of the upper jaw was to be completed
in 17 days. The second stage of treatment was six months later and was to be
completed within two weeks.
11_Waxing up the custom-fabricated
Cercon coping components
IDENTITY | 27
8_Impression with six transfer copings
of the Anyklos Balance System
12_Finished copings with the Cercon
component cemented to the titanium
copings