TOPAX DE Operation & Maintenance Instructions
TOPAX DE Operation & Maintenance Instructions
TOPAX DE Operation & Maintenance Instructions
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.3 Assembly of wall mounted devices<br />
First, remove the terminal<br />
covering.<br />
Prepare three drill holes<br />
(to be max. M5). Check<br />
the top hole, to ensure<br />
that the wall-mount casing<br />
can either be safely hung<br />
or foisted on. If it is hung<br />
on, the top hole must be<br />
120 mm above the bottom<br />
two. If it is foisted on, said<br />
distance must amount to<br />
135 mm.<br />
In both cases the screws<br />
must protrude for at least<br />
3mm.<br />
Hang the device onto the<br />
top screw or foist it on from<br />
the underside, then fix it on<br />
via the two bottom screws.<br />
Either fit the terminal covering<br />
back on, or proceed<br />
directly with the various<br />
connections.<br />
14 | Operating Manual <strong>TOPAX</strong> <strong>DE</strong> | Device Installation and Connection