TOPAX DE Operation & Maintenance Instructions

More documents

Recommendations

Info

Connection Relay outputs Analogue outputs Analogue inputs Digital input Digital interfaces (optional) 3 potential free dry contacts, freely configurable, 6A, 250 V, max. 550 A 2x (built in casing) or 3x (wall-mounted casing) 0/4 – 20 mA, electrically isolated, maximum 500 Ohm load 4 measurement inputs, for chlorine, pH, ORP and temperature external controller stop or water deficiency sensor RS485, baud rate 9600, data format 8Bit, 1 start and 1 stop bit, no even parity. It is possible to activate the TOPAX DE with the software TopView (Windows, A/N 78349). 1.14 Different types of TOPAX DE and its function Function DE 1 DE 2 DE 3 DE 4 DE 5 DE 6 Free chlorine chlorine dioxide pH-value Metering Metering & Controlling Temperature Redox Flow input/ Disturbance variable RS 485 (optional) Metering & Controlling X Metering Metering Metering Metering & Controlling X X X X X X X NOTE! NOTE! The disturbance variable (DE 3/DE 6) only works in connection with 0/4-20 mA stepping motor. | Operating Manual TOPAX DE | Overview of Device Operation Functions
1.15 Technical Specifications Feature Built-in casing Wall-mounted casing Assembly option Panel mounted device Table or wall mounted device Device sizes 96 x 96 x 127 mm (WxHxD) 165 x 160 x 80 mm (WxHxD) Weight 0.8 kg 1.0 kg Connectors Push-screw terminal Spring-load terminal Protection Classes Supply voltage for up to maximum 1.5 mm² section wiring IP54 (front end), IP55 (at front end door) IP65 230 V +6/-10%, 50/60 Hz. Alternatively:110 V or 24 V Internal safety fuses: none 230 V: 63 mA delayed action fuse 110 V: 125 mA delayed action fuse 24 V: 800 mA semi-delayed action fuse Power input Display 10 VA LCD graphic display 128x64, backlit, displays measurement values and relative units, displays operating conditions. Outputs 2 x 0/4 – 20 mA 3 x 0/4 – 20 mA Interfaces Controller electrically isolated, maximum 500 Ohm load RS485, baud rate 9600, data format 8Bit, 1 start and 1 stop bit 2 independent controllers for chlorine values and pH values Controller options ON/OFF Controller (see table 1.14) Switch points Alarm function Contact load Operating temperature Storage temperature Atmospheric moisture 2 dual switch points, free set point within the metering range 2, with maximum and minimum limit values and time delay 6 A/ 250 V, maximum 550 VA ohmic resistive load (with RC protective circuit) 0 – +50°C -20 – +65°C 0 – 90 % non condensing Overview of Device Operation Functions | Operating Manual TOPAX DE |
Page 1 and 2: TOPAX DE For free chlorine, chlorin
Page 3 and 4: 6. Controller Unit Settings........
Page 5 and 6: 3.) WARNING! Risk of electric shock
Page 7: 1.13 Overview of Device Operation F
Page 11 and 12: 2. Device Installation and Connecti
Page 13 and 14: 2.2 Installation of built-in casing
Page 15 and 16: 2.4 Terminal connection diagram of
Page 17 and 18: 2.5 Terminal connection diagram of
Page 19 and 20: 3. Directions on Device Operations
Page 21 and 22: NOTE! If you do not wish to save th
Page 23 and 24: Contr. release Input active with lo
Page 25 and 26: 5. Metering Unit Settings Free chlo
Page 27 and 28: 0.44mg/l 7.24pH 736mV 27.2°C MAN >
Page 29 and 30: 6. Controller Unit Settings The con
Page 31 and 32: Meter test **TOPAX DE 2 P-min 0.5s
Page 33 and 34: NOTE! Measuring value trend display
Page 35 and 36: h —— —— —— —— 10s 0
Page 37 and 38: 7. Alarm Alongside the metering con
Page 39 and 40: 7.1 Alarm messages Error message Ev
Page 41 and 42: 8.3 Assembly of a Data Network (Top
Page 43 and 44: CAUTION! With a defect in the TOPAX
Page 45 and 46: mA A outputs3 3 3 english french sp
Page 47 and 48: H Hysterese........................
Page 49 and 50: 12. Declaration of conformity This
Page 51 and 52: 14. Warranty Please copy and send w

TOPAX DE Operation & Maintenance Instructions

Create successful ePaper yourself

Delete template?

Save as template?