DeNight Special 50 Manual - CMC Versand

Step 27
Slide the cowl the rest of the way onto the fuselage
and use a 3/32-inch hex wrench to secure it with four
4-40 x 1/2-inch Allen screws, #4 steel washers and
1/4-inch lengths of silicone tubing.
Step 29
Reinstall the needle valve and ratchet spring.
Step 31
Install the spinner cone and check that it does not
contact the propeller. Adjust the position of the
propeller if necessary. Use a #1 Phillips screwdriver to
secure the spinner cone with two #4 x 1/2-inch screws.
Step 28
Insert the plug into the fuel fill line and press the plug
into the body of the fuel dot.
Step 30
Install the spinner backplate and propeller, then
secure them with the washer and propeller nut
supplied with the engine. Space the trailing edge of
the propeller 1/8 inch from the small pins on the backplate.
38 DeNight Special 50 ARF Assembly Manual