DeNight Special 50 Manual - CMC Versand

Final Assembly
Parts Required
Fuselage
Wing panels
Canopy
Wing tube
#4 steel washers (2)
4-40 x 3/8-inch Allen head machine screws (2)
4-40 x 5/8-inch Allen head machine screws (2)
9-inch servo extensions (2)
Step 2
Plug the male lead from the switch into the battery
port of the receiver.
Step 4
Plug a 9-inch servo extension lead into the aileron
and an auxiliary channel port in the receiver. Feed the
other end of the leads under the radio tray and out the
aft hole in the left and right wing roots.
Tools Required
3/32-inch hex wrench
Thin CA
Dental floss
Step 1
Connect the battery lead to the switch and secure with
dental floss. Apply a very small drop of thin CA to the
knot to prevent it coming loose.
Step 3
Plug the rudder, elevator and throttle servo leads into
their corresponding receiver ports.
DeNight Special 50 ARF Assembly Manual
41