EQ Station Manual v. 2.01 sw. 220 English - TC Electronic
EQ Station Manual v. 2.01 sw. 220 English - TC Electronic
EQ Station Manual v. 2.01 sw. 220 English - TC Electronic
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MOTOFADER 64<br />
I/O<br />
The I/O button gives access to adjust LoCut and I/O levels.<br />
Select of function and adjustment is done with the ADJUST<br />
wheel and ARROW keys.<br />
Use the arrow CURSOR keys for general navigation and<br />
adjustment on the Motofader display, e.g. for adjusting<br />
levels and LoCut.<br />
MOTORIZED FADERS<br />
A/B<br />
Press COMPARE to compare current settings with the<br />
settings from the loaded preset.<br />
A - is the settings from the stored preset.<br />
B - is the adjusted preset.<br />
If the Edited indication is not present in the display, and<br />
pressing the A/B button does not change graphic <strong>EQ</strong><br />
values, current settings are the unmodified preset values.<br />
As soon as you change a fader-value, the Edited flag will<br />
appear.<br />
The A/B compare only affects the Graphic <strong>EQ</strong> part of the<br />
processing.<br />
OK<br />
29 high-quality 60mm motorized faders, covering<br />
frequencies from 31Hz to 20kHz is the main adjustment<br />
section. The faders move fast and precisely, giving a truly<br />
reliable picture of the Graphic <strong>EQ</strong> settings for selected<br />
channel(s).<br />
The OK button is used to confirm destructive operations<br />
such as the reset of “All” and “Group” settings, as well as<br />
the “Paste” function. When confirmation is needed this will<br />
be indicated in the display.<br />
ADJUST wheel<br />
The ADJUST wheel is used to change parameter values.<br />
CURSOR<br />
46