download PDF - Switchover Help Scheme

More documents

Recommendations

Info

Inserting the Batteries into the Remote Control 1. Lift open the battery compartment cover (as shown). 2. Install 2 “AAA” batteries (included); the correct polarity is shown inside the battery compartment. Always check the positive/negative symbols on the batteries to ensure they are inserted correctly. 3. Replace the battery compartment cover and push down until it clicks shut. Note: • Always dispose of old batteries safely. Check with your local council for how you should get rid of batteries. Never put batteries on a fire or in the bin with normal household waste. 10 HDZ-100 User Guide.indb 10 16/04/2012 15:10
Connecting Equipment to the Rear of the Receiver q TV aerial w e r t yuio q Plug your aerial lead into the RF IN socket of the receiver. w If required, plug an Ethernet cable between the Ethernet socket and a modem or router. Cable not supplied. Refer to page 14 for more details. e If required, plug a SCART cable between the SCART OUTPUT socket of the receiver and your TV, Video or DVD recorder. r If required, plug the RF cable between the RF OUT socket of the receiver and your TV, Video or DVD recorder. t Plug the HDMI cable between the HDMI OUT socket of the receiver and your TV. y If required, plug a HDMI cable between your DVD player, DVD recorder, Set-top box, Games console and the HDMI IN 1/2 socket of the receiver. Cable not supplied. u If required, plug a USB Flash drive or a cable from a Digital Still Camera or Card reader in to the USB socket. Refer to page 29 for more details. i If required, plug an Optical cable (TOS link) between the SPDIF output socket of the receiver and your Hi-Fi or Surround Sound System. Cable not supplied. o Plug the supplied AC mains adaptor between the power socket of the receiver and a standard wall socket. Only switch on the wall socket when all cables have been attached. (Do not cut off the supplied AC mains adaptor’s plug.) Refer to page 18 for more details on how to change the viewing mode to HDMI 1/2 and USB. A HDMI cable is recommended as it gives higher quality picture and sound and is required for High Definition viewing. Note: • Socket names vary according to make and model of your equipment. • USB socket does not support all USB devices or cameras. 11 HDZ-100 User Guide.indb 11 16/04/2012 15:10
Page 1 and 2: Freeview HD receiver HDZ-100 User g
Page 3 and 4: End User Licence This product inclu
Page 5 and 6: Table of Contents Important Safety
Page 7 and 8: Overview of the Freeview HD Receive
Page 9: q TV - Switches the TV on/into Stan
Page 13 and 14: Automatic Tuning 1. Ensure the aeri
Page 15 and 16: Connecting to the Internet Choosing
Page 17 and 18: Connecting to the Internet By press
Page 19 and 20: Everyday Use Using Standby When you
Page 21 and 22: The Electronic Programme Guide (EPG
Page 23 and 24: The Timers Screen Using the Timer f
Page 25 and 26: Modifying Timers ‘Change/Delete
Page 27 and 28: The Channel List The Channel List d
Page 29 and 30: The Photo Viewer The Photo viewer f
Page 31 and 32: The Main Menu To Press Access the M
Page 33 and 34: Main Menu Options Picture Mode Allo
Page 35 and 36: Main Menu Options • Network Setti
Page 37 and 38: Programming the Remote Control The
Page 39 and 40: Troubleshooting Should you experien
Page 41 and 42: Troubleshooting Using Internet Serv
Page 43 and 44: Specifications Video output Audio o
Page 45 and 46: HDZ-100 User Guide.indb 45 16/04/20
Page 47 and 48: HDZ-100 User Guide.indb 47 16/04/20

download PDF - Switchover Help Scheme

Create successful ePaper yourself

Delete template?

Save as template?