download PDF - Switchover Help Scheme

Main Menu Options
- The optical output (SPDIF) will carry 2-channel PCM Stereo (with Dolby Surround).
- The SCART will carry Stereo (with Dolby Surround).
2. Dolby Digital.
Select this option if connecting to a Dolby Digital compatible TV/Amplifier, using a digital
optical lead (SPDIF).
- The optical output (SPDIF) will send Dolby Digital 5.1 (if supported).
- The HDMI will carry Dolby Digital 5.1 if supported, otherwise it will carry 2-channel PCM
Stereo (with Dolby Surround).
- The SCART will carry Stereo (with Dolby Surround).
3. Dolby Surround.
Select this option if connecting to a TV/Amplifier that supports Dolby Surround Pro Logic,
Dolby Pro Logic II, Dolby Pro Logic IIx or Dolby Pro Logic IIz decode.
- All outputs will carry Stereo (with Dolby Surround).
4. Stereo.
Select this mode if connecting to a Stereo audio device.
- All outputs will carry Stereo (without Dolby Surround).
Audio Delay
Allows you to delay the audio timing so that it synchronises with the TV picture. This allows for
delays that may be introduced by some TVs.
Dynamic Range Control
The following options are available:
1. Off mode .
The sound output is as is intended by the programme being watched.
2. TV mode.
Default values of Cut and Boost are selected to both reduce high volume and increase low
volume sound, relative to the main sound volume through your TV.
3. On mode.
Allows Cut and Boost values to be changed.
Cut: Allows you to reduce high volume sounds such as explosions, relative to the main sound
volume. The maximum reduction is 100.
Boost: Allows you to increase low volume sounds such as speech or background sounds,
relative to the main sound volume. The maximum increase is 100.
Note:
• These settings are only effective if supported by the broadcaster.
34
HDZ-100 User Guide.indb 34 16/04/2012 15:10